TV Mounting Height

tv mounting heigth

TV Mounting Height And Why It Is Important

TV mounting height will fluctuate depending on the distance you will be viewing the TV from, the room layout, and whether you’ll be sitting, upright standing or a relaxed laying down position while watching TV. But due to the simple fact that no tv viewing perspective is alike, we encourage you to  either sit or stand where you anticipate you will be watching the tv then put post-it notes on the wall to represent the edges of the TV. Once you’ve identified a position that is comfortable for your neck, you’ve found the ideal height for your situation. Note that most people mount their TV too high, such that they are looking upward at their TV. is to be avoided as it will cause neck strain.

Suggestions for Flat Screen TV Mounting Height

For the majority of living room installations where you will be sitting while watching, the focal point of the TV will generally be 3-4 feet from the floor. Low Profile tv mounts will operate well in this environment, as you will be looking at the TV precisely at eye level. However, if you prefer the appeal of a higher installation or if you’re mounting over a fireplace, you will certainly need a Tilting TV mount. Tilting mounts will permit you to point the TV downward so you can still view the TV easily. The average height for most tilting mount scenarios is four to five feet off the floor.

TV Mounting Height

Articulated Mounts For Enhanced Viewing

If you think you’ll be watching TV from various angles (in many cases lying down in bed or standing up from various points a room), you should consider a Articulated TV Mount, as these mounts not only tilt downward but swivel left and right as well. Swivel mounts are also most ideal for company or business office environments where space is . Articulated mounts also offer the greatest overall flexibility to adapt to an ever changing environment. If you decide to remodel or improve your store/business setup you can rest assured these mounts are fully adjustable and will not require moving. Much like the tilt TV mounts, Articulated mounts will also commonly be mounted about four feet from the floor depending on customer desired tv mounting height.

 

Need a TV Mounting Service in Charlotte

Tv mounting in charlotte NC

Need a TV Mounting Service in Charlotte

Need a TV Mounting Service in Charlotte then look no further. When searching for trades for tv mounting in Charlotte take time to explore what South Charlotte Services has to offer. Enjoy the convenience and streamlined display of watching your favorite programming anywhere in the house from the common living room TV wall mount to your bathroom televisions, kitchen area, living space, ceiling mounts, garage or even outdoors on your patio. Enjoy the savings at the same time over what the “big box” stores charge. We are able to provide our homeowners with all of the same equipment needed for your project without the high retail mark-up.

need a tv mounting service in charlotte

Need A TV Mounting Service In Charlotte That Cares

See why year after year, residents and business owners that need a tv mounting service in the Charlotte NC area have voted South Charlotte Services at the top vendor for TV mounting based on service, affordability and premium quality of work. With flat-panel television mounting prices that start at just $80 and services that can’t be matched, you can’t go wrong with the professional staff at SCS TV Installation Service in Charlotte.

Just buy your mount and correct length 6-15′ HDMI cables. This way you know you are getting a high quality mount at a reasonable price. Knowing that your $1000 TV is being held up by a quality mount that you researched and purchased is priceless. Not to mention the warranty is yours to keep. Never go for the free mount included gimmick many tv mounting services try to push on you. Try to getting a TV mounting service back out after their cheap $5 tv mount has failed. Most are made in some third world country and have no warranty.

[embedyt] http://www.youtube.com/watch?v=Y6fmjv68oSc[/embedyt]

Buying Durable TV Mounts

All the flatscreen mounts and accessories below South Charlotte TV Mounting Service recommends highly. When purchasing articulated or full motion mounts be sure to only buy dual arm mounts. Never buy a single arm articulated mount unless under 42″. Most end up failing or drooping. We always guarantee all workmanship for 5 years but can not be responsible for inferior single arm mounts. Although some of these are not the cheapest they are for better than those found at big box stores where you will pay double and are dual arm wall plates which are far more superior.

professional tv mounting service in charlotte

If you need a TV mounting service in Charlotte NC then please don’t hesitate to give us a call for a free over the phone estimate. As mention before basic tv mounting starts at $80 for flatscreens up to 46″with homeowners supplied wall mount. Basic fireplace tv mounting starts at $130.00 without wire concealment with homeowner supplied wall mount. Go here for more tv installation prices.south charlotte services tv installer

South Charlotte Services Serves The Following Areas

North Carolina Service Areas: South Charlotte, Uptown Charlotte, Matthews, Waxhaw, Weddington,Pineville, Marvin, Indian Trail, Stallings, Ballantyne and Dilworth

South Carolina Services Areas: Indian land, Fort Mill, Tega Cay, Lake Wylie and Northern Lancaster.

Sourced: Consumer Product Safety Commission

Remember if you need a tv installation service then don’t hesitate to give us a call for a free over the phone estimate at 704|442|7019

Reasons To Mount A TV

reasons to mount a tv

Reasons to Mount a TV

Reasons to mount a tv are numerous but here are the top three homeowners should take into consideration when deciding to mount one.

There are at least 3 main reasons to mount your TV to the wall rather than let it sit precariously on a stand. Wall mounted TVs transform an already useful entertainment area into an actual creative statement. There are a variety of other factors to take into consideration when mounting your tv to the wall.

 


Child Safety Security

Reasons to mount a tv by south charlotte servicesChild Safety should be the most genuine of reasons to mount a TV to the wall. It is also much safer than having it on a furniture stand. Ask anyone who has ever brushed against a TV that’s on a stand knows how unsettling it can be. In addition, if customers have children or an unruly dog in the household, the likelihood of that TV falling over rises dramatically. TV’s kill or injure a child every 2 weeks. One last point, if you are ill-fated enough to have a break-in, burglars are more likely to snatch up a stand alone TV, rather than bother taking one down that has been bolt mounted to the wall.


Space Conservation | Increased Space and Style

For the majority of people, unless they’re residing in the large estate, space conservation is usually always at a premium. When customers mount a TV on their wall, you immediately free up a remarkable amount of space. This immediately allures to the interior designer lurking within almost all of us, and homeowners rapidly discover that the space that they’ve now freed up can be utilized in new and exciting ways.


Increased View-ability and Performance

The third most significant reason to mount tv is view-ability and performance. Homeowners can now say farewell to the days when you had to sit in a certain location at a certain angle at a certain period of day to get a lucid view of whatever was on the TV. One of the best reasons to mount a TV is customers get to choose from the many different types of TV wall mounts available now. Most articulated mounts allow homeowners to watch your TV from almost any area of a room at any time of the day.


Simplicity and Ease of Use

Among the other reasons to mount your television is that it’s very easy. Installing a TV on all types of wall surfaces is covered in my free DIY TV mounting videos. If you can read a blog or view a video clip, you could mount your T.V. on the wall. If you still really feel that this beyond your skill degree or just do not have the time then give us a call or text. We have a transparent cost structure.
There you have it– 3 excellent reasons to mount your tv to the wall. Please visit our site for more information.

Need Bathroom Exhaust Fan Installed In Charlotte

bathroom exhaust fan

Need Bathroom Exhaust Fan Installed In Charlotte

Need bathroom exhaust fan installed in Charlotte. If a homeowner’s bath fan is making an odd screeching sound, just will not switch on or it does not remove the dampness, then this should help resolve the problem. The reason bathroom exhaust fans are required is to remove excess moisture produced from showers and steam produced by them. This critical to prevent the chance of black mold production.

bathroom exhaust fan installation

When carrying out restroom vent fan replacement setup, homeowners do not have to remove the full duct assembly. They just need to get rid of the fan electric motor assembly. They can after that look online or take the exhaust fan housing assembly to your local Lowes, Home Depot, or ACE hardware store. Then they can match it up with a substitute fan motor assembly. These exhaust fan replacement electric motors are often very affordable depending on features such as light and how quiet they are. They generally start around $20 bucks each. They are usually easy to change, you simply need to see to it you match it up with the proper replacement electric motor that will suit your duct work.

need bathroom exhaust fan installed in Charlotte

Use of eye protection is suggested when getting rid of and replacing the follower motor as dirt and brushing shavings will be covering every little thing inside the vent and may fall into your eyes.

First Step to Checking a Exhaust Fan

Prior to replacing the exhaust fan electric motor, one should see to it the plastic cover is not loose as well as not developing the shaking sound since it is hanging above you in many cases. Likewise, there may be a strange noise originating from inside the duct since there is a lot dust as well as dust covering the moving parts. Now the homeowner can merely clean the dust off of the bath fan blades as well as bordering area. Clean every little thing out making use of a wand style vacuum and afterwards examination to see if the sound has actually stopped.

The homeowner could additionally get rid of the old bathroom exhaust fan electric motor assembly as well as plug the fan motor right into an additional power outlet in your house to test it. This is to see if it is transforming properly. They could additionally shoot a few squirts of oil on the bath fan’s electric motor shaft if it has actually frozen up. When they’ve done every little thing you possibly can without changing anything, placed every little thing back together and also examine to see if it is now functioning properly. If so, it was just dirty and changing the bath fan electric motor is not required.

When To Call South Charlotte Services

If it still does not function properly, then it might be time to call South Charlotte Services to install a new updated bath fan. When the homeowner are going to the trouble of having it removed they might as well invest in better exhaust fan that is low noise. The property owner will probably notice quite a difference in prices regarding CFM compared to the cheaper ones often used by most building contractors.

If homeowners need bathroom exhaust fan installed they come in a variety of styles and options including lights, night lights and heaters as well as models with humidity or motion sensing or smartly linked operation to meet whole house ventilation standards.  Whereas a typical exhaust fan is rated at about 4.0 Sones, Most bath exhaust fans has models that are certified by the Home Ventilating Institute (HVI) at less than 0.3 Sones.  A fan like this will not only make your experience more enjoyable, it will also be pleasing to others in the house who are still sleeping.

Need a Ceiling Fan Installed in Charlotte

Handyman services

Need a Ceiling Fan Installed in Charlotte

Need a Ceiling Fan Installed Charlotte
If you have lived in the Charlotte area you quickly understand the significance of having a ceiling fan installed. Fan installation starts at $75 for 8-10ft ceilings. Call for free over the phone quote at

704-442-7019.

South Charlotte Services provides a step-by-step overview of installing a versatile as well as sophisticated looking fan fixture.need a ceiling fan installed in charlotte

The popularity of ceiling fans continues to grow as an increasing number of homeowners discover exceptional, year-round power and financial savings. In summertime, ceiling fans develop cooling breezes, which reduce the pressure on air conditioners. In winter, they distribute warmed air to keep the space cozy.

Setting up a ceiling fan is reasonably clear-cut, specifically if the space over comes from an attic room. Nonetheless, even when it isn’t, the work is still rather very simple for a professional ceiling fan installer. Right here, we’ll show how to replace an old lighting fixture with a new ceiling fan and light, in a space without any attic over. The advantage of this strategy is that you do not need to run new electrical wiring.

Simply bear in mind, electrical boxes utilized for ceiling lights aren’t sturdy or sufficient to hold a ceiling fan. You need to replace the existing electric box with one developed for ceiling fans.

Why You Need a Ceiling Fan Installed

There are few fixtures that can affect the look and also livability of an area as well as a ceiling fan. It can keep you cool on sultry summer season days, press cozy air down right into the room during winter, or even function as the space’s primary illumination if you include a light package. Switching an existing light with a ceiling fan is a simple, one-day job considering that the circuitry is already in place.

You can not just fasten the ceiling fan from the existing electrical box. It’s just not solid or sufficient to support the included weight and vibration of most ceiling fans. Assuming you do not have access to the ceiling fan from above, you have to either use a specially designed fan support and also box to place the fan in between joists or, even better, screw a fan-rated “pancake” box directly to a ceiling joist.

How you can Install a Ceiling Fan on Your Own


Removing the Existing Lighting fixture.

See to it electricity to circuit is shut off and also carefully remove the glass cover from the old lighting fixture.

Loosen the retaining nut or screws that hold the light component to the ceiling.

Reduced the fixture as well as detach the wires by twisting off the plastic ports from completions of the cords.Removing old light fixture


Step 2: Eliminate Box and Cut New Opening

Get rid of the old electrical box from the ceiling. If it’s attached to a joist, tear it free with a flat bar. You might need to take off a metal plate to loosen the box; after that pry the bar from the joists.

Hold a 1/2-inch-thick pancake box to the ceiling, then trace around it with a pencil.

Cut along the line with a sheetrock saw.


Step 3: Affix New Electrical Box

Feed the electric cord coming from the ceiling through the knockout hole in the pancake box.

Install the box right into the hole in the ceiling and press it tight against the underside of the joist.

Affix the box to the joist with the two 1 1/2- inch No. 10 hex-head screws provided. Drive in the screws with a drill/driver furnished with a 5/16-inch nut-driver tip.

Cover the cable’s bare copper wire around the basing screw inside the box. Allow the wire end to suspended for later connection to fan ground wire.ceiling fan boxes


Step 4: (Optional) Install a Ceiling Fan Medallion

Glue on the Ceiling Medallion.

Apply urethane-based glue to the rear of the ceiling medallion.

Pass the cables with the medallion.

Center the medallion on the pancake box and press. Secure it with four 6d finishing nails driven into the joist.

Set the nailheads and fill with caulk or spackle.


Step 5: Mount the Ceiling Plate

Hold the fan’s metal ceiling plate around the pancake box then pull the cables through the ceiling plate opening.

Affix the ceiling plate to the box with two 1 1/2- inch-long 10-32 machine screws.


Step 6: Fastening the Fan Components Together

With the ceiling fan on the floor, feed the cords coming from the motor through the center of the ceiling cover. Let the cover sit on top of the motor.

Next, successfully pass the fans electrical wires through the hollow down-rod pipe.

Thread the down-rod pipe into the top of the motor. Make use of a wrench to tighten the square-head locking screw on the side of the down rod.Ceiling fan assembly


Step 7: Make the Electrical Connections

Insert the Down-Rod into the ceiling plate holder.

Make use of the twist-on wire nuts, attach ground wires to the bare copper wire originating from the electrical box. Join both white cables and then both black cables. If installing to a duel switch then attach the blue wire to the existing red wire. This will make one switch operate the fan and the other will operate the light. If installing a ceiling fan remote the red wire will not be used.ceiling fan with pull chainceiling fan wiring connected to swiches


Step 8: Affix the Blades and Lights.

Attach each fan blade to a blade iron (the support that holds the blade to the fan). After that, secure the blade irons to the motor with the screws offered.

If installing a light kit then you will attach it into the cable hanging from the bottom of the fan’s electric motor.

Next attach light shades as well as light bulbs.

Screw the plastic holder for the remote to the wall close to the wall switch.


If you need a ceiling fan installed in Charlotte don’t want to DIY then don’t hesitate to give South Charlotte Services a call at 704|442|7019

Best Type TV Mounts For Your Situation

best type tv mounts

Best Type TV Mounts For Your Situation

The best type TV mounts for your installation and situation. Selecting the most effective flat panel TV wall mount can be a hard choice since there are many different styles, brands, and types of TV mounts. Choosing the wrong install can create you hours of frustration as you try to get it to function properly or just end up returning it to the store as well as starting over. This guide breaks down the three most typical kinds of TV wall mounts, full-motion/articulating, tilting, and also motorised, and then offers a couple of tips on just what to try to find in a good wall surface place.

Full-Motion/ Articulating

best type TV Mounts

One of the best type TV mounts is a Full-motion wall mounts that provide you the ability to adjust your TV of the wall mount and pivot it any kind of direction. They can also turn up or down, as well as press back flat against the wall when you desire a flat mount look. Full-motion places are fantastic for corner installations. Full-Motion Wall Mounts additionally functioned well for installing a TV in that will be visible from several different angles. The mount can also be used connect to the rear of the old TV niches and also the arm will certainly bring the TV flush to the front, making it appear like the TV is drifting. These articulated mounts are commonly more costly and somewhat harder to mount than tilting or low-profile choices. Some double arm full-motion places can pull out from the wall up to 30″ or a lot more, while the less costly single arm options generally appear concerning 10″. We recommend at least a 20+” arm for corner setups of large Televisions. Bear in mind that you will require longer cables with a full-motion mount. We recommend a minimum of 8′, yet 12′ is optimal in many scenarios. You will likely use up at least 4′ of cable by routing it as if the mount could move without pinching cable televisions. Another consideration is that also when pushed level versus the wall surface the TV will not be as near the wall surface just like a tilting or unnoticeable install.

Base Line: Great for corners, niches, closets, recessed locations, and other situations where the TV should pull out as well as swivel. They are harder to mount, much more pricey, and also need longer cords.

Low-Profile Wall Mount

best type tv mounts that are low profile

Another best type mounts are low-profile wall mount is used when you desire the TELEVISION as near the wall surface as possible. They do not turn or rotate in any way, yet are generally the least expensive of any kind of install. However, in some cases the TELEVISION is so close to the wall surface that you could not access the cords to plug in. If the cord connections are on the back of the TELEVISION, encountering the wall, you will certainly need 90 degree level adapters as well as will certainly need to use spacers to bring the TELEVISION out from the wall. If the links are on the side of the TV you are in far better shape, but in some cases the cables can press the bottom of the TV out, making the TELEVISION tilt somewhat upwards. Unless you require your TELEVISION as close to the wall surface as feasible, we tend to suggest tilting wall mounts over inconspicuous layouts. A choice would certainly be to make use of a full-motion install within a recessed cavity which will supply the cleanest look because the TELEVISION can be flush with the wall.

Things to consider when using low-profile mounts: Being the least expensive wall mount choice. Less complicated to mount than full-motion. Places TELEVISION closer to the wall surface than full-motion or tilting, on a flat wall surface. One problem that can arise from these types mounts is cabling which can cause issues and make the TV tilt up which is not a desired outcome.

Tilting Wall Surface Mount

Best type mounts for tilting

One of the best type of mount is a tilting wall mount which is the ideal selection for most installments. It installs very near the wall; numerous tilting wall installs are really optimal for “low-profile tilting”. These mounts can usually handle even more weight than a full-motion design and also offer simpler installment. The TELEVISION does not really move up or down on the wall surface, they simply turns up or down and also it could not be pulled out from the wall. This is an excellent option if the TELEVISION the being placed where exterior light from windows would normally cause glare or undesired reflections on the display.

Bottom Line: The most effective choice for many installations. Allows for the TELEVISION to tilt up or down. Less costly than full-motion installs, however more pricey than low-profile. Much easier to set up than full-motion.

Choosing the Proper Vesa Bolt Specification

The best type tv mounts are generally based off of the VESA standard and also can sustain numerous dimensions of Televisions. Basically, the VESA typical determines just how much apart mounting bolt openings need to be on the back of a TELEVISION. Due to this requirement you could check out the handbook of your TV and also see just what the bolt pattern is, and then locate a wall place that works. A lot of wall surface places checklist on the side of the box what screw patterns they deal with. This technique gets the guess work of wondering if a mount will certainly help a particular TELEVISION. Also inspect the weight that the mount can hold and also make sure the weight of the TELEVISION is within that array. By taking a look at weight as well as screw pattern specifications you could establish what wall mount install will certainly fit your TELEVISION.

What Makes One Mount Better Than Another Mount?

As you purchase a wall surface install you may see that costs differ considerably in between different brands and also styles. It has actually been our encounter that less expensive wall surface places tend to lack beneficial functionality that much more costly installs include. With that stated, we have actually set up lots of affordable mounts successfully. Below are a couple of points to search for:

Level Modification:
Some places will certainly allow you to adjust the degree of the TV after it’s on the wall. This is specifically valuable when aiming to level a TV with a fireplace mantle.

Securing System:
Several business places have an area for a lock to maintain the TV from being stolen.

Accuracy Height Adjustment:

Best Tv mounting height
Once the TELEVISION is mounted on the wall surface it can be changed up or down, this is useful when trying to install a TV in a recessed location.

Equipment:
Less costly mounts have the tendency to feature less screws and also lower quality lag screws compared to the best type TV mounts. Lag bolt holds the install on the wall and also reduced quality screws can damage while tightening them down.

Mobility:
Can you control the TELEVISION effortlessly as soon as it’s mounted? If you have to release screws making modifications instead of just using your hand to tilt and/or expand your television you could want something much more ergonomic.

Best Type TV Mounts Final thought:
Inevitably, as long as the wall surface mount you purchase is ranked to handle your TELEVISION you shouldn’t stress over the TELEVISION falling off the wall surface. All the extra functions we discussed are great to have, however not always needed. The actual method is knowing ways to set up the TV so it is safe as well as looks excellent. There are a lot of specialty mounts not covered in this write-up. The very best type TV mounts can provide in-depth details you can get on the supplier’s web site. If you take a look at a few of the significant manufacturers like Peerless, Sanus, Cheetah, as well as Omnimount you should be able to discover a mount that fits your needs. Of course we are only a phone call away it you need additional suggestions or ideas.  Don’t hesitate to call South Charlotte Services at 704|442|7019.

Charlotte TV Wall Mount Buying Suggestions

We always give you the option to buy the Television wall mount yourself or choose us for your TV wall mounting service. That way you choose the type, quality and price. One fact stands out, most but not all Charlotte TV mounting companies are buying cheap overseas wall mounts to increase profits. We’ve seen them as low as $6.00 a piece out of China and all you get is a promised warranty from the TV wall mount installation company. Personally, I would not risk my expensive Super Ultra High Definition being held up by a six dollar mount. So watch out for the old free wall mount wall mount special since we all know nothings free.

When buying TV wall mounting brackets there are many factors to consider. You can find a TV wall mount bracket from local big box stores for around $60.00. As of June 2015, Harbor Freight has tilt TV wall mounts (lowest) for around $30.00 in Charlotte. However you save a considerable amount of money purchasing television wall mounts online for those who possess the time. For the same price you pay at big box store you can get higher quality TV wall mounts online. I shop around to find the best TV wall mounts cost wise but we also demand high quality and they must be guaranteed. I only purchase from 5-Start rated sellers and never have been let down once. Modern A/V also offers high quality mounts for a great price. Motorized TV wall are also available but they do add labor cost.

Simply measure your TV and make certain the mount you buy is the correct size. As long as your within that range you will be good. Shipping times will vary with Amazon but usually a week or so. After you get it from them just give us a call and will install it on any wall for $80.00 (for TV’s up to 50″) and $100 ( for TV’s 55″-65″). You can also buy a wire cover tracking kit, in case you do not want it concealed in the wall. There’s an additional fee for wire concealment starting at $40. TV mounting over fireplaces are also an additional cost depending on difficulty. If you have any other installation questions simply call us or text us at 704 442 7019. You can even text us an image of the TV installation area for a better over the phone rough estimate.

Best type tv mounts really depend on your individual situation. Please feel free to call us for more information on tv mounts that fit your needs.

Need A Handyman In Charlotte

south charlotte handyman service

Need a Handyman Service In Charlotte, NC

Need a handyman service in Charlotte. Serving the Charlotte, NC area since 2006, The South Charlotte Handyman Service, supplies exceptional craftsmanship specializing in residential as well as commercial makeover and also repair. From home window blind installment to space additions, from a 2-hour job to a 2-week work, we could offer you with straightforward as well as trusted services at affordable prices.need light fixtures installed in charlotte ncneed a ceiling fan installed in charlotteneed a handyman service in charlotte, NC

South Charlotte Services are dedicated to giving each client with individualized attention, helping them meet every one of their goals for home or business improvements. So if you need a handyman in Charlotte, please don’t hesitate to give us a call at 704-442-7019 for a free estimate.

Need a Handyman Service In  Charlotte, NCneed a handyman in charlotte

Inside You House:

  • Ceramic tile
  • Floor covering
  • Trim carpentry
  • Drywall repair as well as dangling
  • Doors hung or repaired
  • Windows installed or repaired
  • Art Placement

 

Exterior:

  • Roofing
  • Skylights
  • Walkways
  • Rot repair
  • Rain gutter repairs/Drainage concerns
  • Exterior siding
  • Maintaining wall surfaces
  • Porches
  • Deck structure and repairing
  • Pressure washing ( Sidewalks, Decks, Homes, Driveways) Masonry
  • Locksets mounted
  • Fencing repairs
  • Deck Sealing
  • Concrete
  • Windows hung or repaired
  • Doors hung or fixed

Living Area:

  • Photo and/or mirrors mounting

Installment of:

Include or get rid of shelving:

  • Drape rods
  • Blinds

Cooking area and also Bath:

  • Wall surface tile installed or fixed
  • Flooring ceramic tile mounted or fixed
  • Caulking
  • Grout installed or repaired
  • Shower/Bathtub installation
  • Shower doors mounted
  • Fixtures changed or mounted
  • Bathroom accessories hung
  • Disposals mounted
  • Kitchen counters replaced
  • Equipment replaced
  • Electrical outlets included
  • New Equipments mounted
  • Electric Outlets Upgraded
  • Plumbing
  • Components set up or changed
  • Bathrooms repaired or replaced
  • Easy leak repair.

Electrical:

  • Ceiling installed or repaired
  • Light fixtures installed or repaired
  • Switches over replaced
  • Outlets added.

Miscellaneous:

  • Family pet doors
  • Mailboxes set up
  • Dog houses developed & set up
  • Bird homes
  • Swing sets built & put together
  • Storage loses constructed & assembled
  • Furniture constructed & put together
  • Bookcases.

need a charlotte handyman service in charlotte

New House owner Walkthroughs

In most cases the homebuilder does not have your best interest in mind. Seen it over and over, as soon as you close on the house you become an afterthought. My past jobs with homebuilders has giving me a unique advantage on spotting and recommendation for correcting item the builder missed during the build phase. We will do your homeowners walk prior to meeting with builder for 2 and 12 month walkthrough. These walkthroughs are extremely important to correct any items not properly installed during the construction phase. We will give you a detailed list to give your builder of items needing attention.

TV Tip-Over Alert

TV tip-over warning

TV Tip-Over Alert

New TV tip-over alert. South Charlotte Services wants all parents understand that your TV as well as the furnishings it rest on can be a severe danger small children or elderly. They can topple as well as injure or even kill a child. The federal government reports that 267 children have actually passed away from TVs toppling considering that 2000 and with 11,000 experienced injuries. About half were under 3 years of ages.

Mecklenburg County sheriff and Charlotte Mecklenburg Police Department talked about lessons found out at head of state’s child protection force.

TV tip-over alert

Prevent TV Tip-over Alert | Don’t place a TV on dressers

Don’t place a TV’s on a dresser or various other furniture that a child could topple over. And also it’s not simply the older tube Televisions that could fall over. The more recent larger flat-panel TVs could likewise be a danger. They are lighter compared to older tube TVs, yet as they get larger, the weight rises. And their stands or “feet” might not fit the old TV stands. If possible, always secure TV to the via sturdy wall mount.

What you should do

It’s relatively very easy to protect a TV to ensure that kids cannot topple it. Make certain that the stand or furniture is tough and suitable for the size and weight of the TV, and position the set as far back as you can on the stand. If you’re putting a new TV on an old TV stand, ensure that it doesn’t prolong over the edges. Always attach the TV to the furnishings, and if the furniture could tip over, affix it to a wall surface.

Consumer News also that warns that some furniture like TV cabinets as well as regular cabinets can topple even without a TV on top. If you have little kids around, furnishings that may overturn need to additionally be secured to wall with simple wall straps or cables.