Affordable Bathroom Exhaust Fan Installation In Charlotte Area

Affordable Bathroom Exhaust Fan Installation In Charlotte Area

Affordable bathroom exhaust fan installed in the Charlotte area. If your bath fan is making a load screeching sound, will not switch on or it does not remove the dampness, then I hope this sheds light on the problem. The reason bathroom exhaust fans are required by code in most jurisdiction is to remove excess moisture produced from showers, toilets and faucets. This imperative to protect against black mold production.

When carrying out a bathroom exhaust fan installation, homeowners do not have to remove the full duct assembly. They just need to get rid of the fan electric motor assembly. They can after that look online or take the exhaust fan housing assembly to your local Lowes, Home Depot, or ACE hardware store. Then they can match it up with a substitute fan motor assembly. These exhaust fan replacement electric motors are often very affordable depending on features such as light and how quiet they are. They generally start around $20 bucks each. They are usually easy to change, you simply need to see to it you match it up with the proper replacement electric motor that will suit your duct work.

bathroom exhaust fan installation 

Use of eye protection is suggested when getting rid of and replacing the follower motor as dirt and brushing shavings will be covering every little thing inside the vent and may fall into your eyes.

First Step to Checking a Exhaust Fan

Instead of a complete bathroom exhaust fan installation, one should see to it the plastic cover is not loose as well as not developing the shaking sound since it is hanging above you in many cases. Likewise, there may be a strange noise originating from inside the duct since there is a lot dust as well as dust covering the moving parts. Now the homeowner can merely clean the dust off of the bath fan blades as well as bordering area. Clean every little thing out making use of a wand style vacuum and afterwards examination to see if the sound has actually stopped.

The homeowner could additionally get rid of the old bathroom exhaust fan electric motor assembly as well as plug the fan motor right into an additional power outlet in your house to test it. This is to see if it is transforming properly. They could additionally shoot a few squirts of oil on the bath fan’s electric motor shaft if it has actually frozen up. When they’ve done every little thing you possibly can without changing anything, placed every little thing back together and also examine to see if it is now functioning properly. If so, it was just dirty and changing the bath fan electric motor is not required.

When To Call South Charlotte Services

If it still does not function properly, then it might be time to call South Charlotte Services to install a new updated bath fan. When the homeowner are going to the trouble of having it removed they might as well invest in better exhaust fan that is low noise. The property owner will probably notice quite a difference in prices regarding CFM compared to the cheaper ones often used by most building contractors.

If homeowners need bathroom exhaust fan installed they come in a variety of styles and options including lights, night lights and heaters as well as models with humidity or motion sensing or smartly linked operation to meet whole house ventilation standards.  Whereas a typical exhaust fan is rated at about 4.0 Sones, Most bath exhaust fans has models that are certified by the Home Ventilating Institute (HVI) at less than 0.3 Sones.  A fan like this will not only make your experience more enjoyable, it will also be pleasing to others in the house who are still sleeping.

So if if you are in need a bathroom exhaust fan installation in Charlotte NC then please don’t hesitate to give us a call at 704|442|7019.

Need A Ceiling Fan Installed in Charlotte NC

Need a Ceiling Fan Installed in Charlotte NC


Need a Ceiling Fan Installed In Charlotte NC
If you have lived in the Charlotte NC area you quickly understand the significance of having a ceiling fan installed. Ceiling fan installation starts at $75 for 8-10ft ceilings. Call for free over the phone quote at

704-442-7019.

South Charlotte Services provides a step-by-step overview of installing a versatile as well as sophisticated looking fan fixture. Of course if you need a ceiling fan installed in Charlotte NC then don’t hesitate to give us a call.

The popularity of ceiling fans continues to grow as an increasing number of homeowners discover exceptional, year-round power and financial savings. In summertime, ceiling fans develop cooling breezes, which reduce the pressure on air conditioners. In winter, they distribute warmed air to keep the space cozy.

Setting up a ceiling fan is reasonably clear-cut, specifically if the space over comes from an attic room. Nonetheless, even when it isn’t, the work is still rather very simple for a professional ceiling fan installer. Right here, we’ll show how to replace an old lighting fixture with a new ceiling fan and light, in a space without any attic over. The advantage of this strategy is that you do not need to run new electrical wiring.

Simply bear in mind, electrical boxes utilized for ceiling lights aren’t sturdy or sufficient to hold a ceiling fan. You need to replace the existing electric box with one developed for ceiling fans.

Why You Need a Ceiling Fan Installed


There are few DIY fixtures that can affect the look and also livability of an area as well as a ceiling fan. It can keep you cool on sultry summer season days, press cozy air down right into the room during winter, or even function as the space’s primary illumination if you include a light package. Switching an existing light with a ceiling fan is a simple, one-day job considering that the circuitry is already in place.

You can not just fasten the ceiling fan from the existing electrical box. It’s just not solid or sufficient to support the included weight and vibration of most ceiling fans. Assuming you do not have access to the ceiling fan from above, you have to either use a specially designed fan support and also box to place the fan in between joists or, even better, screw a fan-rated “pancake” box directly to a ceiling joist.

How To Install A Ceiling Fan On Your Own


Removing the Existing Lighting fixture.

See to it electricity to circuit is shut off and also carefully remove the glass cover from the old lighting fixture.

Loosen the retaining nut or screws that hold the light component to the ceiling.

Reduced the fixture as well as detach the wires by twisting off the plastic ports from completions of the cords.

Step 2: Eliminate Box and Cut New Opening


Get rid of the old electrical box from the ceiling. If it’s attached to a joist, tear it free with a flat bar. You might need to take off a metal plate to loosen the box; after that pry the bar from the joists.

Hold a 1/2-inch-thick pancake box to the ceiling, then trace around it with a pencil.

Cut along the line with a sheetrock saw.


Step 3: Affix New Electrical Box


Feed the electric cord coming from the ceiling through the knockout hole in the pancake box.

Install the box right into the hole in the ceiling and press it tight against the underside of the joist.

Affix the box to the joist with the two 1 1/2- inch No. 10 hex-head screws provided. Drive in the screws with a drill/driver furnished with a 5/16-inch nut-driver tip.

Cover the cable’s bare copper wire around the basing screw inside the box. Allow the wire end to suspended for later connection to fan ground wire.

Step 4: (Optional) Install a Ceiling Fan Medallion


Glue on the Ceiling Medallion.

Apply urethane-based glue to the rear of the ceiling medallion.

Pass the cables with the medallion.

Center the medallion on the pancake box and press. Secure it with four 6d finishing nails driven into the joist.

Set the nailheads and fill with caulk or spackle.

Step 5: Mount the Ceiling Plate


Hold the fan’s metal ceiling plate around the pancake box then pull the cables through the ceiling plate opening.

Affix the ceiling plate to the box with two 1 1/2- inch-long 10-32 machine screws.

Step 6: Fastening the Fan Components Together


With the ceiling fan on the floor, feed the cords coming from the motor through the center of the ceiling cover. Let the cover sit on top of the motor.

Next, successfully pass the fans electrical wires through the hollow down-rod pipe.

Thread the down-rod pipe into the top of the motor. Make use of a wrench to tighten the square-head locking screw on the side of the down rod.

Step 7: Make the Electrical Connections


Insert the Down-Rod into the ceiling plate holder.

Make use of the twist-on wire nuts, attach ground wires to the bare copper wire originating from the electrical box. Join both white cables and then both black cables. If installing to a duel switch then attach the blue wire to the existing red wire. This will make one switch operate the fan and the other will operate the light. If installing a ceiling fan remote the red wire will not be used.

Step 8: Affix the Blades and Lights


Attach each fan blade to a blade iron (the support that holds the blade to the fan). After that, secure the blade irons to the motor with the screws offered.

If installing a light kit then you will attach it into the cable hanging from the bottom of the fan’s electric motor.

Next attach light shades as well as light bulbs.

Screw the plastic holder for the remote to the wall close to the wall switch.


If you need a ceiling fan installed in Charlotte NC and don’t want to DIY then don’t hesitate to give South Charlotte Services a call at 704|442|7019

Need A Handyman In Charlotte NC

Need a Handyman Service In Charlotte, NC


 

Need a handyman service in Charlotte NC. Serving the Charlotte, NC area since 2006, The South Charlotte Handyman Service, supplies exceptional craftsmanship specializing in residential as well as commercial makeover and also repair. From home window blind installment to space additions, from a 2-hour job to a 2-week project, we can offer you straightforward as well as trusted services at affordable prices.

South Charlotte Services are dedicated to giving each client with individualized attention, helping them meet every one of their goals for home or business improvements. So if you need a handyman in Charlotte, please don’t hesitate to give us a call at 704-442-7019 for a free estimate.

Need a Handyman Service In  Charlotte, NC


Inside You House:

  • Ceramic tile
  • Floor covering
  • Trim carpentry
  • Drywall repair as well as dangling
  • Doors hung or repaired
  • Windows installed or repaired
  • Art Placement

Exterior

  • Roofing
  • Skylights
  • Walkways
  • Rot repair
  • Rain gutter repairs/Drainage concerns
  • Exterior siding
  • Maintaining wall surfaces
  • Porches
  • Deck structure and repairing
  • Pressure washing ( Sidewalks, Decks, Homes, Driveways) Masonry
  • Locksets mounted
  • Fencing repairs
  • Deck Sealing
  • Concrete Replacement
  • Windows hung or repaired
  • Doors hung or fixed
  • Photo and/or mirrors mounting

TV Installations | Home Improvement Services

Include Or Get Rid Of Shelving

  • Drape rods
  • Blinds

Kitchen And Bath Renovations

  • Wall surface tile installed or fixed
  • Flooring ceramic tile mounted or fixed
  • Caulking
  • Grout installed or repaired
  • Shower/Bathtub installation
  • Shower doors mounted
  • Fixtures changed or mounted
  • Bathroom accessories hung
  • Disposals mounted
  • Kitchen counters replaced
  • Equipment replaced
  • Electrical outlets included
  • New Equipments mounted
  • Electric Outlets Upgraded
  • Plumbing
  • Components set up or changed
  • Bathrooms repaired or replaced
  • Easy leak repair.

Electrical:

  • Ceiling installed or repaired
  • Light fixtures installed or repaired
  • Switches over replaced
  • Outlets added.

Miscellaneous

  • Family pet doors
  • Mailboxes set up
  • Dog houses developed & set up
  • Bird houses
  • Swing sets built & put together
  • Storage loses constructed & assembled
  • Furniture constructed & put together
  • Bookcases.

Detailed New Homeowner Walkthroughs And Builder Punch List Items


In some cases the homebuilder does not have your best interest in mind. Seen it over and over, as soon as you close on the house you become an afterthought. This is why it extremely important to correct any items the builder has not properly completed during the home’s construction.

My past employment with homebuilders has giving me the unique advantage in spotting and recording incorrect items the builder missed during the building phase. As a general rule We will do your homeowners walk prior to meeting with the builder or superintendent for their new and 12 month walkthroughs. These walkthroughs are extremely important so you can correct any items not properly installed during the construction phase. Remember that anything not properly completed or missing will be your responsibility once you sign off on the builders punchlist.

We will do a thorough pre-walk a day or two prior to our scheduled homeowner walk-through. Afterward we will send you a detailed list to give to your builder of items needing attention. We will also come back after the items are completed to insure they were done properly.