Need A Ceiling Fan Installed in Charlotte NC

Handyman services

Need a Ceiling Fan Installed in Charlotte NC

Need a Ceiling Fan Installed In Charlotte NC
If you have lived in the Charlotte NC area you quickly understand the significance of having a ceiling fan installed. Ceiling fan installation starts at $125 for 8-10ft ceilings. Call for free over the phone quote at 704-442-7019.


South Charlotte Services provides a step-by-step overview of installing a versatile as well as sophisticated looking fan fixture. Of course if you need a ceiling fan installed in Charlotte NC then don’t hesitate to give us a call.

The popularity of ceiling fans continues to grow as an increasing number of homeowners discover exceptional, year-round power and financial savings. In summertime, ceiling fans develop cooling breezes, which reduce the pressure on air conditioners. In winter, they distribute warmed air to keep the space cozy.

Setting up a ceiling fan is reasonably clear-cut, specifically if the space over comes from an attic room. Nonetheless, even when it isn’t, the work is still rather very simple for a professional ceiling fan installer. Right here, we’ll show how to replace an old lighting fixture with a new ceiling fan and light, in a space without any attic over. The advantage of this strategy is that you do not need to run new electrical wiring.

Simply bear in mind, electrical boxes utilized for ceiling lights aren’t sturdy or sufficient to hold a ceiling fan. You need to replace the existing electric box with one developed for ceiling fans.

Why You Need a Ceiling Fan Installed

There are few DIY fixtures that can affect the look and also livability of an area as well as a ceiling fan. It can keep you cool on sultry summer season days, press cozy air down right into the room during winter, or even function as the space’s primary illumination if you include a light package. Switching an existing light with a ceiling fan is a simple, one-day job considering that the circuitry is already in place.

You can not just fasten the ceiling fan from the existing electrical box. It’s just not solid or sufficient to support the included weight and vibration of most ceiling fans. Assuming you do not have access to the ceiling fan from above, you have to either use a specially designed fan support and also box to place the fan in between joists or, even better, screw a fan-rated “pancake” box directly to a ceiling joist.

How To Install A Ceiling Fan On Your Own

Removing the Existing Lighting fixture.

See to it electricity to circuit is shut off and also carefully remove the glass cover from the old lighting fixture.

Loosen the retaining nut or screws that hold the light component to the ceiling.

Reduced the fixture as well as detach the wires by twisting off the plastic ports from completions of the cords.

Step 2: Eliminate Box and Cut New Opening

Get rid of the old electrical box from the ceiling. If it’s attached to a joist, tear it free with a flat bar. You might need to take off a metal plate to loosen the box; after that pry the bar from the joists.

Hold a 1/2-inch-thick pancake box to the ceiling, then trace around it with a pencil.

Cut along the line with a sheetrock saw.

Step 3: Affix New Electrical Box

Feed the electric cord coming from the ceiling through the knockout hole in the pancake box.

Install the box right into the hole in the ceiling and press it tight against the underside of the joist.

Affix the box to the joist with the two 1 1/2- inch No. 10 hex-head screws provided. Drive in the screws with a drill/driver furnished with a 5/16-inch nut-driver tip.

Cover the cable’s bare copper wire around the basing screw inside the box. Allow the wire end to suspended for later connection to fan ground wire.

Step 4: (Optional) Install a Ceiling Fan Medallion

Glue on the Ceiling Medallion.

Apply urethane-based glue to the rear of the ceiling medallion.

Pass the cables with the medallion.

Center the medallion on the pancake box and press. Secure it with four 6d finishing nails driven into the joist.

Set the nailheads and fill with caulk or spackle.

Step 5: Mount the Ceiling Plate

Hold the fan’s metal ceiling plate around the pancake box then pull the cables through the ceiling plate opening.

Affix the ceiling plate to the box with two 1 1/2- inch-long 10-32 machine screws.

Step 6: Fastening the Fan Components Together

With the ceiling fan on the floor, feed the cords coming from the motor through the center of the ceiling cover. Let the cover sit on top of the motor.

Next, successfully pass the fans electrical wires through the hollow down-rod pipe.

Thread the down-rod pipe into the top of the motor. Make use of a wrench to tighten the square-head locking screw on the side of the down rod.

Step 7: Make the Electrical Connections

Insert the Down-Rod into the ceiling plate holder.

Make use of the twist-on wire nuts, attach ground wires to the bare copper wire originating from the electrical box. Join both white cables and then both black cables. If installing to a duel switch then attach the blue wire to the existing red wire. This will make one switch operate the fan and the other will operate the light. If installing a ceiling fan remote the red wire will not be used.

Step 8: Affix the Blades and Lights

Attach each fan blade to a blade iron (the support that holds the blade to the fan). After that, secure the blade irons to the motor with the screws offered.

If installing a light kit then you will attach it into the cable hanging from the bottom of the fan’s electric motor.

Next attach light shades as well as light bulbs.

Screw the plastic holder for the remote to the wall close to the wall switch.

If you need a ceiling fan installed in Charlotte NC and don’t want to DIY then don’t hesitate to give South Charlotte Services a call at 704|442|7019